Eliminating Excess Business Spending

« Back to Home

Prevent Galling And Keep Your Nuts, Bolts, And Screws In Place

Posted on

Galling is what happens when a nut, bolt, screw, or any kind of fastener becomes less effective because of wear and tear. Galling is created when the nut, bolt, or similar item rubs up against the metal in the socket or other hole that it's supposed to be locked into. Galling can be hard to spot, but it's important to keep an eye out because a bolt or nut that is experiencing this will not be able to do its job very effectively. In a worst-case scenario, your nut or bolt could fall out and cause your equipment to fall apart, causing property damage or even injury. For best results, here are some tips on how to minimize or reduce galling.

Lubrication Is Important

The most important thing you can do if you are concerned about galling would be to ensure that every nut, bolt, or fastener you are dealing with is properly lubricated. You can dip the fasteners in a bit of oil-based lubricant before they go into the socket or wherever you end up putting them. This lubricant will serve as a way to keep the fastener from rubbing up against the metal of the socket. If you begin to notice some wear and tear on your bolts, you may want to replace them by purchasing new ones through a supplier of nuts, bolts, screws, and fasteners.

Periodic Inspection By a Professional Is Key

You probably don't have a ton of extra time in your day to methodically check up on every nut, bolt, or screw on your property. You are focused on your business and won't notice what's going on with galling until it's too late. But one way you can stay ahead of this issue would be to hire a professional to inspect all of your heavy equipment or machinery on a regular basis. The professional will likely check every bolt or screw on the device and let you know if there is a problem that needs to be addressed.

Galling Can Even Get Into the Threading

Galling is sometimes not immediately obvious, especially if it is only occurring within the threads of the fasteners. It's not a bad idea to periodically unscrew or unfasten a bolt and visually inspect the threading. This will also give you another opportunity to add more lubricant to the socket or the piece itself. 

Contact a nut, bolt, or screw provider today for more information. To learn about other products like solid state lighting systems, contact a company like RAF Electronics.


Share